A Tilehurst company - serving Houston, TX

IKO Gutter Replacement Nationwide

Tile roofingTile roofing
Architectural shinglesArchitectural shingles
Metal roofingMetal roofing
GAFGAF
Owens CorningOwens Corning
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

Your new roof for as low as$159/month*On approved credit; ask for current terms
Get your free estimate

IKO Gutter Replacement: The Houston Owner’s Guide

IKO gutter replacement in Houston typically runs $8 to $14 per linear foot installed, so a standard single-story home with 150 to 180 linear feet of gutters lands between $1,200 and $2,500. We stock IKO-compatible profiles on the truck and can usually complete a full gutter swap in one afternoon. Most homeowners discover the problem the hard way: a seam opens during a spring downpour, water pours down the fascia, and suddenly you’re outside with a flashlight watching soil wash away from the foundation. Houston’s storm bursts don’t wait for a convenient repair window, and a failed IKO gutter section is exactly the kind of problem that gets worse every time it rains.

Professional roofer repairing damaged asphalt shingles on a residential roof nationwide

Call (254) 566-3573

Which IKO Models This Applies To

IKO manufactures gutters and downspouts across their Rainproof and ShieldPro lines, with the most common residential profiles being 5-inch K-style and 6-inch half-round configurations. The 5-inch K-style dominates the Houston market because it moves high volumes of water quickly, which matters when we get three inches in an hour. IKO’s profile has a slightly tighter ogee curve than generic big-box alternatives, so if you’re mixing new sections with older IKO runs, the seam alignment matters more than people expect. A trained eye can spot the mismatch instantly; a rushed handyman job leaves visible kinks and uneven laps that catch leaves and pine needles.

Tilehurst Roofing Houston is an independent service provider, not an IKO dealer or affiliate. That independence means we don’t push a single house brand. Alongside IKO, we work with GAF, Owens Corning, and CertainTeed gutter and roofing systems, plus Atlas, Tamko, and Boral for surrounding roof components. The right call is matching what’s already on the house rather than ripping everything out because a salesman prefers one logo.

For identifying what you have: check the inside of a gutter seam for an embossed manufacturer stamp, or measure the width across the top opening. 5 inches is K-style; 6 inches is typically half-round or oversized K. If you’re unsure, send us a photo or have a tech look during the estimate. Compatibility gotcha: IKO’s downspout outlets are square-profile and don’t accept every round aftermarket elbow without an adapter collar, which is exactly the kind of five-dollar detail that leaks when skipped.

Explore

Styles & brands we work with

Architectural shingles
Architectural shingles
Metal roofing
Metal roofing
Tile roofing
Tile roofing
GAF
GAF
Owens Corning
Owens Corning
Flat & low-slope
Flat & low-slope

Signs Your IKO Gutter Replacement Is Failing

  • Water spilling over the front edge during normal rain. This usually means the gutter pitch has sagged or the outlet screen is clogged, but it can also signal a section that’s pulled loose from the fascia. When the hangers fail, the gutter tilts forward and turns into a waterfall instead of a channel.
  • Persistent drip or visible stream at a seam or corner. IKO sections are joined with lap connectors and sealant that Houston’s heat and UV break down faster than the metal itself. Once the sealant crumbles, the seam opens and water finds the path of least resistance down your fascia board.
  • Peeling paint or dark streaks on the fascia behind the gutter. That’s water getting behind the system, not through it. It means the back edge of the gutter has pulled away from the house, and every rain event is soaking the wood behind it.
  • Visible rust-through, perforation, or pinhole leaks in the gutter body. Steel gutters with scratched factory coating will rust from the inside out in Houston’s humidity. By the time you see rust on the exterior, the metal is paper-thin and not worth patching.
  • Gutters pulling away from the roofline or visible gaps between the gutter and fascia. This is a hanger failure, often from wood rot behind the fascia where the screws no longer bite. Tightening a screw into rotted wood is a temporary fix that fails again within months.

Replacement Cost & What’s Included

Here’s the straight pricing picture for IKO gutter replacement in Houston:

  • Standard 5-inch K-style aluminum, seamless or sectional: $8 to $12 per linear foot installed
  • 6-inch half-round IKO profile: $10 to $14 per linear foot installed
  • Downspout replacement: $4 to $8 per linear foot installed
  • Fascia repair (if rot is present): $3 to $6 per linear foot, depending on depth
  • Debris removal and haul-away of old gutters: typically $150 to $300 per job

The range comes down to three things: linear footage, whether your fascia boards are solid enough to hold new hangers, and accessibility. A two-story home on a steep Houston lot with clay soil that’s settled the walkway all out of level costs more to work on safely than a single-story ranch in Meyerland. Every estimate includes the gutter sections, hangers, end caps, downspout connections, sealant, and labor. You get a written line-item price before any work starts, and the whole job carries our written guarantee under the 365-Day Done Right Promise. If a seam opens or a hanger fails inside a year, we return and correct it at no charge.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

DIY or Call Us?

On a single-story home with easy ladder access, a careful owner can clean out a clogged IKO gutter, check hanger spacing, and re-seat a downspout elbow that’s slipped loose. Those are reasonable Saturday jobs. What most people shouldn’t do themselves is replace full runs of gutter, especially at height. The work involves working off a ladder for hours, handling ten-foot sections of metal that flex and cut, and getting the pitch exactly right over a long run. A gutter that slopes the wrong way by half an inch over twenty feet pools water and breeds mosquitoes, which Houston already has enough of. If you’re seeing rust-through, rotten fascia, or gutters separating from the house, call us at (254) 566-3573. You’ll know the price before we touch the roof.

FAQs

Get Your Free IKO Gutter Replacement Estimate

If your gutters are leaking, sagging, or rusting through, don’t wait for the next Houston downpour to find out how bad it’s gotten. Call Tilehurst Roofing Houston at (254) 566-3573 and we’ll schedule a time to walk the property, measure the runs, and hand you a written price before anything gets taken apart. A live person answers the phone 24 hours a day, seven days a week, including evenings and weekends. Greg Holloway walks every job himself and makes sure the estimate actually makes sense before a single screw is driven.

Written by Greg Holloway, Owner, Tilehurst Roofing Houston at Tilehurst Roofing Houston, serving Houston and nearby areas.

Need Roofing help in Houston? Licensed & insured · Written quotes before work starts response · free estimates
Call (254) 566-3573
Local Service Coverage

Request a Free Estimate in Houston

Tell us what you need - Tilehurst Roofing Houston responds fast. No obligation.

By submitting this form, you acknowledge our Privacy Policy and agree that you may be contacted by phone, text, or email regarding your service needs, including from the affiliated professionals who may take on the job.

Prefer to text? Text Us
Call Now - 24/7 Dispatch