Tamko Roof Replacement Nationwide

Tamko Roof Replacement in Houston: What to Know First

Tamko roof replacement in Houston typically runs between $9,800 and $18,500 for a full tear-off and re-roof on an average 1,800-square-foot home, depending on which Tamko shingle line you choose and what’s happening under the existing roof. Most full replacements take three to five working days once materials arrive. We give you a written price before a single shingle moves, and that price does not change unless we open the decking and find damage nobody could have seen from above.

Call (254) 566-3573

This page is for Houston homeowners who already have a Tamko roof and want straight answers about replacing it. If you’re wondering whether to patch again or tear off, what Tamko charges seem fair in the Houston market, or whether the warranty still means anything, you’re in the right place. Call us at (254) 566-3573 and we’ll talk it through on the phone before scheduling anything.

Key Takeaways

• Full Tamko replacement in Houston runs roughly $9,800 – $18,500; architectural lines like Heritage sit mid-range, Titan XT runs higher, MetalWorks is at the top end.
• We are an independent Tamko service provider, not a Tamko-authorized installer, so we recommend the right Tamko product for your roof honestly, without quotas.
• Every job starts with a written price. You’ll know the price before we touch the roof.
• We carry Tamko, GAF, Owens Corning, and CertainTeed, so you are not locked into one brand.
• Our 365-Day Done Right Promise covers the workmanship for a full year, in writing, on every replacement.

How Tamko Products Fail – and How We Fix Them

Tamko makes a solid shingle. Houston’s climate is the variable that wears them down. Here’s what we see on Tamko roofs across the city, from Meyerland to Katy and up through The Woodlands:

• Heritage architectural shingles losing granules on western and southern slopes. Houston sun is unrelenting. After ten to fifteen years, the ceramic-coated granules on Tamko Heritage shingles start sloughing off in a fine grit you can see in the gutters. Granule loss is not cosmetic; the asphalt underneath is now exposed to UV, and the shingle begins to cook. By the time you see bare patches from the yard, the roof is replacing, not repairing. We strip the slope and check the decking before quoting the re-roof.
• Tamko Titan XT cupping and curling near ridge lines. The heavier laminated shingles like Titan XT go rigid over time, especially where attic heat concentrates near the ridge. The edges lift. Water gets under the lifted section during a driving Houston storm and starts eating at the nails. We see this most often on homes with insufficient ridge ventilation. When we replace, we correct the ventilation first; no shingle holds up if the attic is cooking at 140 degrees in August.
• Tamko MetalWorks panels with worn factory finish at the cut edges. Stone-coated steel like MetalWorks resists impact and wind, but on cut ends the factory finish can peel back over years of Houston humidity cycling between wet and dry. Once the steel is exposed, you get surface rust that accelerates at the cut line. Full replacement on MetalWorks usually means panel replacement, not a full roof, if the underlayment is still sound. We inspect panel-by-panel and quote only what needs to come off.
• Tamko StormShield underlayment adhering to decking after a wet install. On some older Houston homes, previous contractors laid StormShield over damp decking. The membrane grips so well that removing it years later pulls plywood up with it. Homeowners get told they need all new decking. What you actually have is a membrane doing its job too well in the Houston humidity. We factor this into the estimate honestly: we tell you if we can re-deck in sections or if the original plywood is genuinely failing.
• Wildfire Defense shingles with failed ridges after flat-profile repairs. Tamko makes a specialty fire-rated line called Wildfire Defense. Some Houston crews patch these with standard three-tab ridge caps because they are cheaper and easier to find. The profile mismatch leaves gaps at the ridge cap. Water gets in during wind-driven rain. When we replace a Tamko ridge, we use the matching Tamko ridge cap, full stop, and we write that part-number detail into your quote so you can verify it.

Our Tamko Roof Replacement Process

Here is how a Tamko replacement runs with us, from the first phone call to the last nail:

1. 1
   Call and conversation. A live person answers at (254) 566-3573. We ask about the age of the roof, what you are seeing, and whether you know which Tamko line is up there. If you do not know, that is fine; we will find out in person.
2. 2
   Walk-through and honest assessment. One of our techs walks the roof, checks the decking from the attic, and looks at ventilation. This is not a drive-by. We go up. We take photos. You see them.
3. 3
   Written price, before any work begins. You get a line-item quote: tear-off, decking replacement if any, underlayment, shingle line, drip edge, ridge cap, flashing. No verbal ballpark. No change order at the door.
4. 4
   Parts and shingle decision. We show you the Tamko option that fits your home and budget, alongside GAF, Owens Corning, and CertainTeed where a different product might actually serve you better. We carry all of them, so the recommendation is honest.
5. 5
   Replacement and cleanup. The crew strips, inspects the decking underside, replaces what is failing, installs the new system, and cleans up with magnets for stray nails. We leave the yard the way we found it.
6. 6
   Walkthrough and written guarantee. Greg Holloway walks the finished roof with you before the crew packs up. The guarantee is in your hand before they drive away, not mailed later. If anything goes wrong inside a year, we come back.

What Tamko Roof Replacement Costs in Houston

Here are real Houston numbers for common Tamko replacement scenarios. These are not manufacturer list prices; they are what we quote on actual homes in this market:

• Full tear-off and Heritage architectural shingles on 1,500 – 2,000 sq ft: $9,800 – $14,200
• Full tear-off with Titan XT architectural shingles: $11,500 – $16,800
• MetalWorks stone-coated steel panel replacement, partial roof: $14,000 – $22,000 depending on slope and panel count
• Decking replacement, per 4×8 sheet, when underlayment has adhered or rot is found: $65 – $95 per sheet
• Ridge cap and flashing replacement on an otherwise sound Tamko roof: $800 – $2,400

What moves the price most in Houston is decking condition, roof pitch, and whether we find a previous bad patch job that needs undoing. Steep roofs and second-story access add labor. Call (254) 566-3573 for an exact number; the estimate is free, and the number on the paper is the number you pay.

Why Houston Homeowners Call Tilehurst Roofing Houston for Tamko Work

We are not a Tamko dealer pushing one brand. We are a Houston roofing company that carries Tamko alongside GAF, Owens Corning, and CertainTeed because homeowners deserve choice, not whatever happens to be on the truck. Greg Holloway learned roofing at Los Angeles Trade-Technical College and has spent years on Houston roofs including the Meyerland corridor, where the clay and the flood cycles keep every roofer honest. He walks every job himself before quoting.

Every replacement carries a written guarantee delivered before the crew leaves. If something fails inside the guarantee period, we return at no charge under the 365-Day Done Right Promise. You will know the price before we touch the roof. And when you call, a live person answers, 24 hours a day, seven days a week. No voicemail. No Monday callback. That is the standard we have held since the Kingswell family of roofing companies started in 2000.

FAQs