Boral Roof Replacement Nationwide

Boral Roof Replacement in Houston: What to Know First

Boral roof replacement in Houston typically runs $18,000 to $45,000 for a full tear-off and new tile or stone-coated steel system, and most jobs take five to nine working days once materials land. We’re an independent Boral service provider, not a factory store, which means we give you a straight written price before any work starts and we’re free to pair your Boral roof with the right underlayment and flashing rather than whatever the manufacturer prefers to bundle. If you’re looking at cracked tiles, recurring leaks, or decking that’s gone soft under a Boral system, call (254) 566-3573 and we’ll walk the roof with you. This page is for Houston homeowners deciding between repairing a Boral roof, replacing sections of it, or tearing it off entirely. We’ll tell you what we’d do if it were our house, and what it costs either way.

Call (254) 566-3573

How Boral Products Fail – and How We Fix Them

Boral makes a few different roofing lines, and they don’t fail the same way. Here’s what we see most often on Houston homes, and how we address it when a full replacement is the right call.

• Boral Concrete Roof Tile (the standard-weight tile): These hold up well against Houston sun, but the freeze-thaw cycle we get a handful of times each winter works on any tiny hairline crack from a past hail hit or a dropped tool. Water seeps in, the crack opens, and eventually the tile splits. On a replacement we pull every damaged tile, inspect the underlayment beneath, and lay new tile with the proper headlap so water channels off the way Boral intended. A lot of Houston roofers nail these too low or too high, which is why so many tiles rattle loose after a strong storm.
• Boral Steel Roofing (stone-coated steel panels/shakes): The panels themselves are tough, but the fasteners and the points where panels meet ridges and valleys are where we see trouble. Over time, Houston’s humidity works on the gasketed washers under the screws. A washer degrades, water creeps in around the fastener, and the decking below gets soft before you ever see a stain on the ceiling. When we replace a Boral steel roof we inspect every fastener line, replace the decking where it’s compromised, and re-secure with fresh washers rather than reusing old ones.
• Underlayment failure under any Boral system: This is the one Boral’s own documentation won’t tell you much about. The underlayment is the waterproof layer under the tile or steel, and in Houston it’s doing most of the real work. Older Boral roofs were often installed over 15-pound felt or early synthetic underlayments that break down in our heat and humidity. When we pull a Boral roof, we typically find the underlayment is the actual problem, not the tile or steel on top of it. We replace it with a high-temp synthetic rated for Houston’s attic temperatures before the new Boral surface goes back on.
• Flashing failures at headwalls, chimneys, and pipe penetrations: Boral tile and steel both last decades when the flashing holds. The flashing is the metal material that redirects water where the roof meets a wall or a pipe. On Houston Boral homes built in the 1990s and early 2000s, we regularly find galvanized flashing that’s corroded through. The tile above it looks fine. The leak is real. On a full replacement we re-flash every penetration and transition with new material, then we water-test before we call the job done.
• Boral roof decking rot at valleys and eaves: Houston’s heavy rain concentrates water in the valleys where two roof slopes meet, and at the eaves where water runs off. If the underlayment or flashing was even slightly off, the decking in those spots has been wet for years. We find this on Boral jobs more than any other brand because the tile hides it so well. Replacement means cutting out the damaged decking, evaluating the rafter tails, and putting down dry, solid wood before anything else goes on.

Our Boral Roof Replacement Process

Here’s how a Boral replacement works when you call Tilehurst Roofing Houston.

1. 1
   Call and scheduling: You call (254) 566-3573. A live person answers, takes your address and the basics of what you’re seeing, and schedules the walk-through. No callback queue. No waiting until Monday.
2. 2
   On-site inspection: Greg Holloway walks the roof himself. He checks the tile or steel condition, tests the decking in suspect areas, and pulls back a few spots at the eaves and valleys to see what the underlayment really looks like underneath. You’ll get a plain-English explanation of what’s failing and whether a full replacement is warranted or a section repair would hold.
3. 3
   Written price before any work starts: We write up the full scope: tear-off, decking repair or replacement, underlayment, underlayment type, new Boral tile or steel, flashing, ridge and valley work, and cleanup. You get that number in writing before we touch the roof. It doesn’t change at the door.
4. 4
   Material ordering and scheduling: Boral materials come from regional supply houses, so lead time can run two to four weeks depending on the product line and color. We book your start date once materials are confirmed in the yard, and we show up in the window we gave you.
5. 5
   Tear-off, decking, and dry-in: We tear off the old roof, replace any rotted decking, then lay the new synthetic underlayment and flashing. We don’t rush the dry-in; this is the part that keeps your house dry for the next 30 years.
6. 6
   Boral installation, water test, and cleanup: We install the Boral tile or steel with the correct fastening pattern and headlap, re-flash every penetration, then test. We haul off every scrap and nail. Then we walk the roof with you before we leave. The written guarantee is in your hands before the crew pulls out of the driveway.

You’ll know the price before we touch the roof. That’s not a promise we make on some pages and forget on others. It’s how every job starts.

What Boral Roof Replacement Costs in Houston

Here are real numbers for Houston, based on the jobs we’ve priced and completed recently.

• Full Boral concrete tile roof replacement (standard-weight tile, standard underlayment, no major decking replacement): $18,000 to $28,000 for a typical 2,000 to 2,800 square foot suburban home.
• Full Boral stone-coated steel replacement: $24,000 to $38,000 depending on the profile and complexity of the roof geometry.
• Add decking replacement where rot is found: $3 to $6 per square foot of replaced decking, depending on how much is involved. We’ll show you the rotted wood before we replace it. No surprises.
• Flashing and valley work included in a full replacement: We don’t quote a “basic” Boral roof and then add flashing as an extra. Flashing, ridge, and valley work are in the number from the start.

What moves the price: the roof’s square footage and pitch (steeper roofs mean more labor and safety setup), the Boral product line and color, the condition of the decking underneath, and any chimney or skylight work. Call (254) 566-3573 and we’ll give you an exact written quote after the walk-through. Estimates are free.

Why Houston Homeowners Call Tilehurst Roofing Houston for Boral Work

We’re the local member of the Kingswell family of roofing companies, founded in 2000. That family built its name on a simple promise: say the price before the work, show up in the window we gave, leave the place cleaner than we found it, put the guarantee in writing, and come back if it fails. Houston has no shortage of roofers who’ll take a Boral job they don’t really know. We do know Boral, and we also know when a different material would serve you better. We stock and install across seven manufacturers: GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. If Boral isn’t the right answer for your roof after we inspect it, we’ll tell you that and show you the alternative, with pricing. The 365-Day Done Right Promise covers every job for a full year, and every repair or replacement carries a written guarantee delivered before we leave. If a problem comes up inside that year, we return and make it right at no charge. And when you call, a live person picks up. Every time, day or night.

FAQs

Is Tilehurst Roofing Houston an authorized Boral dealer or installer?
+

Will replacing my Boral roof void the manufacturer warranty?
+

How long does a Boral roof replacement take in Houston?
+

Can you replace just a section of my Boral roof instead of the whole thing?
+

Do you pull permits for Boral roof replacement in Houston?
+