Tamko Gutter Replacement Nationwide

Tamko Gutter Replacement: The Houston Owner’s Guide

Tamko gutter replacement in Houston typically runs $18 to $28 per linear foot installed, including new aluminum or steel gutter sections, hangers, sealant, and downspout connections. We keep Tamko-compatible profiles and matching colors on our trucks, so most single-story homes are back to full function the same day we arrive. You’ll usually notice the problem first as a sagging section pulling away from the fascia board, water pouring over the edge during a hard rain, or rust streaks running down the side of the house. In Houston’s climate, where a single summer thunderstorm can dump two inches of water in an hour, a failing gutter section stops being a cosmetic issue and starts working against the foundation fast.

Call (254) 566-3573

Key Takeaways:

• Installed Tamko-compatible gutter replacement: $18 – $28 per linear foot in Houston
• Match by width (typically 5″ or 6″), profile shape, and material thickness
• We stock common Tamko profiles and colors on the truck
• Written price before any work starts, every time

Which Tamko Models This Applies To

Tamko’s gutter line centers on their continuous aluminum and steel gutter systems, most commonly in 5-inch and 6-inch widths with either K-style or half-round profiles. If you’re matching an existing run, the K-style is what you’ll see on the vast majority of Houston homes, while half-round shows up on older bungalows and some custom builds in neighborhoods like Meyerland and West University Place. The profile matters just as much as the width. A 6-inch K-style gutter cannot be spliced into a 5-inch run without creating a leak point at the joint, no matter how much sealant goes on.

We’re an independent service provider, not affiliated with Tamko directly, which means we match to spec rather than brand-loyalty defaulting. Here’s what we look at when we identify your existing system: the width (measure across the top opening), the profile shape (K-style has a flat back and decorative front; half-round is a simple semicircle), and the gauge or thickness of the metal, which ranges from .027 on economy aluminum up to .032 on heavier residential stock. We can supply genuine Tamko replacement sections or quality aftermarket equivalents that match the profile, color, and gauge, so you’re never forced into a full re-gutter over a single failed run. In Houston’s specific conditions, .027 aluminum tends to dent under falling tree limbs and hail more readily, so if your original gutters are that thinner gauge, we’ll tell you straight that an upgrade in thickness may be worth considering for the replacement section.

Signs Your Tamko Gutter Replacement Is Failing

• Sagging or pulling away from the fascia. Failed or missing hangers are the usual culprit, and the weight of standing water accelerates it. In Houston’s summer heat, aluminum expands and contracts enough to loosen poorly secured hangers within a season or two.
• Water overflowing at a specific point, not the downspout. A clogged or undersized outlet, or a section that’s lost its slope. Houston’s heavy rain events expose this fast; if the water is cascading over the edge in sheets, the gutter isn’t channeling what it should.
• Rust streaks or pinhole leaks on steel sections. Houston’s humidity and salt-adjacent air from the Gulf push steel toward corrosion faster than inland markets. Once pinholes start, the section can’t be patched reliably; it needs replacement.
• Water staining or rot on the fascia board directly behind the gutter. That’s a sign water has been getting behind the gutter, often from a failed end cap or a joint that’s opened up. The fascia may need repair at the same time as the gutter replacement.
• Visible separation at seams or joints. Sealant fails over time, especially under Houston’s UV load. A joint that’s pulling apart is letting water run down the wall and into the soil at the foundation line.

Replacement Cost & What’s Included

For a straight replacement of a failed Tamko gutter section on a Houston home, expect $18 to $28 per linear foot installed. A short 20-foot run on a single-story house lands around $360 to $560. Longer runs, second-story work, and the addition of new downspouts or outlet drops push toward the higher end. The range itself is driven mostly by material choice: steel runs slightly above aluminum, 6-inch runs above 5-inch, and matching certain Tamko color finishes costs a little more than stock white or bronze.

Every price we quote is written and in your hands before any work starts. No price changes at the door. The line-item includes the gutter section itself, hangers, sealant, end caps where needed, and the labor to hang and slope it correctly. Our work carries a written guarantee, delivered before the crew leaves your property. If the replacement fails inside that guarantee period, we return and correct it at no charge under the 365-Day Done Right Promise. You’ll know the price before we touch the roof.

DIY or Call Us?

There are things an owner can safely check, and then there’s the part we’d rather you not learn the hard way. You can clear debris from the gutter, check for visible sag points, and watch how water behaves during a rain. What you shouldn’t tackle is the removal and re-hanging of gutter sections from a ladder, especially on a two-story Houston home where the ground is often wet and the heat makes a long ladder session more fatiguing than people expect. A fall from gutter height is a life-changing injury, and it’s the most common accident we see homeowners attempt. The hangers, slope, and sealant work all need to be right the first time, or the new section leaks just like the old one.

If you’d rather have it matched, priced, and hung by a crew that does this every week, call (254) 566-3573. We’ll come out, measure the failed section, and give you a written number before anything gets touched.

Frequently Asked Questions